您当前的位置:首页 > 产品中心 > 检针机

jc-600bc型双探头检针器

连续式检针机可用来cancer藏在各式缝件产品(如男装、女装、童装、内衣、和服、夹克、床上用品、鞋帽手套、长毛绒玩具、地毯、卫生用品等)中的针、断针及其他针质碎片等,还可在药品、食品(食用菌、鱼、肉、果品等新鲜及其制品)卫生材料等的检测,服装辅料拉链、纽扣的检测,还可用于非铁性材料如铜、铝、锌、造纸、橡胶、化工工业原料检测时混在其中铁质碎片等。

详情介绍


  用途:

  1、连续式检针机可用来cancer藏在各式缝件产品(如男装、女装、童装、内衣、和服、夹克、床上用品、鞋帽手套、长毛绒玩具、地毯、卫生用品等)中的针、断针及其他针质碎片等,还可在药品、食品(食用菌、鱼、肉、果品等新鲜及其制品)卫生材料等的检测,服装辅料拉链、纽扣的检测,还可用于非铁性材料如铜、铝、锌、造纸、橡胶、化工工业原料检测时混在其中铁质碎片等。

  2、在检测缝制类物品的配件例如:拉链、纽扣、扣子等腰考虑专用的无铁磁性商品(如经消磁处理等)。

  3、在食用连续式检针机,操作者身上衣物的铁质物件须取下,因为机器对移动的铁质物件都会有反应,而产生误报警。

  Application:

  1、Automatic conveyor magnetic induction metal detector can use it to detect the needle or ferrous pieces of sewing products.(Such as: male clothing, female clothing, child clothing, underwear, kimono, jacket, bedclothes, shoes, gloves, cat, toll, blanket and healthful ware.)It also can use in material medical and food...etc.(fish, meat, fresh fruits...etc, and its manufacture.)to detect it.And it can detect the clothes of slide fastener,button and use it to detect the ferrous which mixed in nonferrous material,such as copper,aluminum,zinc,paper,rubber,chemicals...etc.

  2、When detect the accessory of sewing articles. Such as: Slide fasteners, button, hook...etc. It needs non-magnet products (It may needs to demagnetized).

  3、When operator is using machine, please take off the all accessory from the body. Cause machine will react to moving metals and will alarm mistake.

  优点:

  1、连续式检针机能轻易且可靠的将铁类杂物检测出来,并有信号器提示你已检测出铁磁性杂物。

  2、当机器检测到钢针或铁类东西是,报警器就会响,输送带就会停止,位置显示指示灯显示被检测物中混入的铁类杂物的位置,并将不合格品退回,效率将会有很大的提高。

  3、机器装有计数器,能够累计检测合格物品数量。

  4、连续式检针机,操作敏感度的调整配合你的检测物品的大小及种类,使你能轻易找到混在产品中的钢针及铁磁性杂物。

  5、由于采用最新设计的传感装置,大大提高了产品的探测能力和信赖感。

  6、全新设计理念,豪华美观,流水线型ABS外壳。

  7、能对超薄型物体和厚型物体进行检测。

  8、有防止皮带走偏装置。

  9、有自动停机功能。

  10、环保设计空转10分钟自动停机节电功能。

  11、最新研发微电脑触摸式控制面板。

  Features:

  1、Automatic conveyor magnetic induction metal detector can detect the needle easily. And it has signaler to tell you there is some ferrous in it.

  2、When machine detects the needle or ferrous, the alarm will sound and the conveyor will stop. The signal light will show the position where the needle or ferrous are and will return the disqualified, which increase the efficiency of working.

  3、Machine equips with counter and it can count the quantity of qualified.

  4、It can adjust the sensitivity of detecting and to meet the different kind and size of detected objects in order to let you to find the needle or ferrous in your detecting products.

  5、It adopt the newly design of trans-induction device. It increases the product of detection and reliance.

  6、Newest design with luxury modern looking streamline ABS cover.

  7、Including extra-thick and extra-thin inspection function.

  8、Belt correct device.

  9、With automatic stop.

  10、EP design of automatically stop function after each 10 minutes empty running.

  11、Vision and sound warning,and anatomically run back function.

  Technical Specifications:

Model型号

SMJ-80

SMJ-85

电压PowerSupply

3P/380V

3P/380V

吸风功率Suction motor

0.37Kw

0.37Kw

毛轴输出最大功率Main motor

0.37Kw

0.37Kw

工作台面Table width

1200×700(mm)

1200×700(mm)

变频调速Frequency inverter

无 no

有 have

机器尺寸L×W×H Dimensions(mm)

1200×700×850

1200×700×850

装箱尺寸L×W×H Packing Volume(mm)

1300×800×1000

1300×800×1000

净重/毛重N.W/G.W

80kg/130kg

80kg/130kg

在线询价

eBRnOX7bRMiKpFGL88mSw6FJjSnSK4dr+hAEtdcf+MhApyhsieWtU2iicWFkN3a0NLn9WrVQWvQQ4Op+7/Ux0/0ySymp6roN